And next time any parts of your vehicle. Think of one iota.com. Thanks. In this video will show you how to replace the headlights were service the bold and the headlights and this 2000 for Chrysler Sebring. It’s a sedan it’s pretty much the same operation for the convertible as well and it’s applicables for model year 2004 through 6. The items that you need or a new set headlights morning auto an 8 millimeters socket ratchet and a small flat blade screwdriver.

Headlights ChryslerMaybe you’re looking to change the bulbs or maybe you want to put a new set of headlights in because years are clouded don’t fade like this car you can see new set of headlights one out about com clears things up. If you’re having trouble seeing at night or you just want your card a little better. New set headlights from one a lot about com help you out site chrysler 300 headlights. Locate the 28 millimeter bolts that hold headlight in place. There and towards the corner. Using my 8 millimeter socket and ratchet to remove those bolts on the head fast for they do that. Take the headlight pull it out I need with a little bit push down. And then pull out.

Go ahead and zoom in on the 2 connectors in the back. Right there on using a small flat blade screwdriver pry up. And then pull out on that socket. And on the other one you can find a little maroon clipped you need you set flat blade screwdriver again. Pride that out and then with your finger pressing on the tab and disconnected. Alright if you’re just looking to service the headlight molds. A twist type socket and the bull just pull straight out. And the ball just get pushed right back in nam. As for the main headlight beam.

It’s got a. Circular disk that goes around and holds it in place when you get that out bold assembly and socket as you can see they are all one piece. Going back and he won a one line up the tabs. On the socket and with the housing and then put the circular locking collar back on. And with this bold again twist the socket and pull the ball about. Bold goes back in straight and then twists and. And I’m going in with the headlight whether you’re replacing it. With a new one from one A. auto were putting back in after servicing the bulbs you gonna want to connect you 2 connectors. You took apart and then slide it in place.

And make sure that the holes at the top with a 2 mounting bolts on the line up with the front and there. And drop your long bulletin the inboard side. And a short bald goes over back by the sender. And on the go ahead fast towards a tightens up. To align your headlights she’s either clockwise or counter clockwise on that’s grew to raise them or let them.